Ametek CEM/Humox, Руководство пользователя

Страница: 52 / 136

4-8 | Thermox CEM/Humox Analyzer
Passwords
This menu option allows you to define a system password. A system password limits
access to certain menu options to authorized personnel only. You can also use this
menu option to disable the password requirement.
By default, the system password is disabled. If you don’t wish to enable
a system password, you can skip this section.
If no one at your site can remember the correct password, you can call
AMETEK/Thermox and a service password will be provided to you so
you can access this Password option and enter a new system password.
1. Select Passwords from the Setup key menu.
You will be prompted to enter a new system password:
Enter NEW Password
2. Enter a four digit password. To protect the identification of the password, the
numbers you enter are displayed as blocks rather than as text.
You are then prompted to reenter the password to verify it.
Reenter to Verify
3. Reenter the password. To protect the identification of the password, the numbers
you enter will be displayed as blocks rather than as text.
To later disable or change the system password, you must first enter
the old password to access this menu option, then change or disable
the password (0000 disables the password).
NOTE

NOTE
