Maintenance, repair and care
Citan BAG0014.4 09.14
127
12.5
Axle and brake
Important!
We recommend carrying out a combination check to determine
the optimum brake behaviour and minimum wear on the brake
pads between the tractor and the machine. Let a specialist work-
shop carry out this check after an appropriate run-in time of the
operating brake system.
To avoid braking difficulties, adjust all the vehicles according to
the EC directive 71/320 EEC.
WARNING
•
Only trained specialists may carry out repair and adjust-
ment work on the operating brake system.
•
Be particularly careful when carrying out welding, burning
or drilling work in the area of the brake lines.
•
After all adjustment and repair work on the brake system,
always carry out a brake test.
General visual check
WARNING
Carry out a general visual check of the brake system. Observe
and check the following criteria:
•
Pipes, hoses and hose couplings may not be damaged or
corroded on the outside.
•
Hinges, e.g. on fork heads, must be properly secured, easy
to move, and not worn out.
•
Ropes and cables
ο
Must be properly run.
ο
May not have any visible cracks.
ο
May not be knotted.
•
Check the piston stroke on the brake cylinders, and adjust
as necessary.
•
The air tank may
ο
Not move in the tensioning belts.
ο
Not be damaged.
ο
Not show any outer damage.