Assembly and function
62
Citan BAG0014.4 09.14
5.22.1
Example for creating tramlines
Some examples for the creation of tramlines are illustrated r (Fig. 44):
A = Working width of the seed drill
B = Tramline distance (= working width fertiliser spreader/field
sprayer)
C = Tramline rhythm (Input into AMATRON 3/ AMALOG
+
)
D = Tramline counter (during operation, the tramline travels are num-
bered all the way through and displayed in AMATRON 3 /
AMALOG
+
).
Carry out inputs and indications following the operator's manual for
AMATRON 3/ AMALOG
+
.
Example:
Working width seed drill: 12 m
Working width fertiliser spreader / field sprayer: 36 m = 36 m tramline
distance
1. In the opposite table (Fig. 44) find:
in column A the working width of the seed drill (12 m) and
in column B the tramline distance (36 m).
2. In the same line in column "C" find the tramline rhythm (tramline
rhythm 3) and set in AMATRON 3/ AMALOG
+
.
3. In the same line in column "D" below the word "START" find the
tramline counter for the first field travel (tramline counter 2) and
set in AMATRON 3/ AMALOG
+
. Enter this value only immediate-
ly before the first travel in the field.
Fig. 44
