Operation
Citan BAG0014.4 09.14
113
4. Open the injector sluice flap (Fig. 123/1) to
allow the seed to flow into the seed collec-
tion trays.
Fig. 123
Fig. 124
Danger!
Danger of squeezing
when the injector sluice flap (Fig.
123/1) is opened or closed!
Only hold the injector sluice flap on
its strap (Fig. 123/1). Otherwise
danger of injury when the sprung
loaded flap will bang.
Never hold your hand between in-
jector sluice flap (Fig. 123/1) and
injector sluice!
5. Turn the handle (Fig. 124/1) to open resi-
due emptying flap.
Hint!
For emptying the removal of the
metering roller is possible (see
Seite 78.
6. In the same way as for the calibration test,
turn the star wheel (Fig. 125) to the left until
the metering wheels and the metering units
are completely empty.
For full metering, briefly run the electric
motor.
7. For the complete cleaning when changing
the seed type, remove the metering wheels
(see Seite 78) and clean together with the
metering unit.
8. Close the flap for emptying residual
amounts (Fig. 124) and affix the calibration
tray on the transport retainer.
Fig. 125
Important!
Seed residue in the metering units
might swell and germinate when the
metering units have not been emp-
tied completely.
This will cause blockage of the me-
tering wheel rotation and result in
damage to the drive.
