Adjustments
Citan BAG0014.4 09.14
95
8.9.2
Adjusting roller pressure
The roller pressure is adjusted by changing the
distance "X" (Fig. 91) on all segments by
means of the screw (Fig. 91/1).
1. Move the machine on the field to the work-
ing position.
2. Apply the tractor parking brake, switch off
the tractor engine and remove the ignition
key.
3. Release two lock nuts (Fig. 91/2).
Fig. 91
4. Set the desired distance „X“.
Raise roller pressure:
Increase distance „X“
Lower roller pressure:
Reduce distance „X“.
5. Firmly tighten the lock nuts (Fig. 91/2).
6. Make the same settings at all segments.
7. Check the work results
The maximum roller pressure of 35 kg per roller in operational posi-
tion must not be exceeded.
