General safety advice
Citan BAG0014.4 09.14
15
2.8
Danger from residual power
Observe the incidence of mechanic, hydraulic, pneumatic, and elec-
tric/electronic residual power on the machine.
Undertake appropriate measures when instructing the operating staff.
Detailed hints are again given in the relevant chapters of this opera-
tor's manual.
2.9
Maintenance and repair, remedy of faults
Carry out all prescribed setting-, maintenance and servicing work in
due time.
Secure all operating systems like compressed air and hydraulics
against unintended starting.
When exchanging larger components carefully affix them to the hoist-
ing implement.
Check slackened screw joints for tightness. After having finished
maintenance work, carefully check all safety devices for proper func-
tion.
2.10
Constructional changes
Never carry out any alterations or fittings or changes on the machine
without approval of the AMAZONEN-WERKE. This also applies for
welding work on bearing parts.
All fitting or alteration measures require the written approval of AMA-
ZONEN-WERKE. Only use the conversion and optional parts ap-
proved by Messrs. AMAZONEN-WERKEN so that the operating per-
mit remains valid according to national and international regulations.
Vehicles and devices plus implements, connected with a vehicle with
an official operating permit for road traffic according to the traffic law
should correspond to the condition as stipulated by the relevant per-
mit.
Important!
Prohibited on principle is
•
boring on the frame or the chassis.
•
re-boring existing holes on the frame or the chassis.
•
welding on bearing parts.
2.10.1
Spare parts and wearing parts and auxiliary parts
Only use original-
AMAZONE
-spare- and wearing parts or the
parts approved by Messrs. AMAZONEN-WERKEN so that the operat-
ing permit remains valid according to the national and international
regulations. When using spare and wearing parts from other manufac-
turers it is not ensured that they have been designed and manufac-
tured to fulfil the operational stress and safety demands.
The AMAZONEN-WERKE do not accept any liability for damage by
using not approved spare or wearing parts or auxiliary parts.
