Assembly and function
Citan BAG0014.4 09.14
59
The menu "operation"
•
shows all required data for sowing operation. Within the menu
job the seed drill is worked during operation.
In the menu "order"
•
the seed rate is entered
•
orders are created and the determined data of up to 20 jobs are
stored.
•
the desired order is started.
In the menu "calibration of seed drill"
•
the entered seed rate is re-checked via a calibration test and if
necessary the gearbox setting is corrected.
In the menu "machine data"
•
the machine specific settings are entered, selected or deter-
mined with the aid of a calibration procedure.
In the menu "Setup"
•
provides the input and output of diagnosis data and the selection
and input of machine basic data. These operations are exclu-
sively left for the service staff.
5.19
Operator terminal
AMALOG
+
The AMALOG
+
consists of the control terminal
(Fig. 40) and the basic equipment (cables and
fastening material).
Fasten the control terminal in the tractor cab in
accordance with the AMALOG
+
operating manu-
al.
AMALOG
+
•
Controls the driving line circuit and the pre-
emergence marker.
•
indicates the position of the track markers
•
indicates the operational speed
•
monitores the seed level in the storage
hopper
•
stores the worked total area
•
monitors the tramlining switching inside the
distributer head.
•
Monitors the blower speed.
Fig. 40
5.20
On-board hydraulics
Optionally available:
•
On-board hydraulic system K 700
•
On-board hydraulic system for blower fan drive with hydraulic
slide-on pump (PTO shaft speed 1000 rpm
)
