Maintenance, repair and care
134
Citan BAG0014.4 09.14
12.8
Setting the tramline bout according to the tractor track width (Author-
ised workshop)
When purchasing the machine and the husbandry tractor, check
whether the tramline setting in the distributor head corresponds to the
track width of the husbandry tractor.
Warning!
The distributor head is located in the centre of the machine.
Apply the parking brake, stop the tractor engine and remove the
ignition key.
Before stepping on, clean the way towards the distributor head
and within the range of the distributor head (danger of slipping).
Danger on the way towards the distributor head and within the
area of the distributor head.
Check whether the tramline switching has been
properly adjusted in relation to the track width of
the husbandry tractor:
•
The seed tubes (Fig. 142/1) of the tramline
coulters must be affixed to the distributor
head openings which can be closed by the
shutters (Fig. 142/2).
If necessary exchange the seed tube
among each other.
•
The track width changes according to the
number of coulters which do not sow seed
when creating tramlines.
For creating two bouts, the following shut-
ters in the distributor head (Fig. 142/2) are
closed per bout
ο
on
Citan
6001 up to 6 openings.
•
Deactivation of shutters (Fig. 142/2) not in
use
Fig. 142
Important!
Adjust the marker discs of the pre
emergence marker (if existing) to
the new track width.
