Transport on public roads
Citan BAG0014.4 09.14
103
Caution!
Fold the pre-emergence marker and
the track markers into transport
position to prevent damage on the
machine at the folding procedure.
7. Fold in machine, see Seite 106.
8. Switch off AMATRON 3.
Fig. 106
Important!
Shut the tractor spool valves during
transport.
The traffic safety kit, see Seite 36, is prescribed.
9. Check the traffic light kit for proper function.
10. Ensure that the warning plates and yellow
reflectors are clean and not damaged. .
Important!
Adhere to the precautions of accident prevention in public road
traffic.
Adhere to the permissible axle loads, tyre load capacities, sup-
port load of the tractor lower links and the total weight of the
tractor (see Seite 68).
For transport of the machine always ensure that the sufficient
front axle load – min. 20 % of the tractor's net weight) is main-
tained. Otherwise the steering ability of the tractor is not en-
sured.
Before starting to travel, switch on the signal light (requires a
licence) and check for function.
Lock tractor lower link arms against unintended lowering.
Observe the sufficient lateral securing of the tractor lower link
arms.
The maximum speed of the machine is 40 km/h. Especially in bad
road conditions a clearly reduced speed would be allowed.
The driving behaviour and the steering and braking ability is
affected by the machine weight.
When driving into bends mind the projection to the sides and the
gyrating mass of the implement.
Sitting or standing on the machine during transport is prohibit-
ed.
CAUTION
In bends take into consideration the wide sweep and the centrif-
ugal mass of the machine.
It is forbidden to ride on the implement or use it as a means of
transport.
