Amazone Ceus 4000-2TX, Руководство по эксплуатации

Страница: 85 / 132

Adjustments
8.2.2 Adjusting the throughput of the disc gangs
Workshop work
The throughput is adjusted by turning the front
and rear disc gang using the spindles.
When the disc gangs are raised as far as they
go, the tines can work at a depth of 30 cm with-
out the disc array being engaged.
When the disc gangs are lowered as far as they
go, the disc array can work at a depth of 10 cm
without the tines being engaged.
Adjusting the throughput
1. Align the unfolded implement horizontally.
2. Set the working depth to the smallest value.
→
The discs are not standing on the ground.
3. Move all of the spindle sleeves evenly using
the ratchets.
Set the throughput via the position of the spindle
sleeves, see page 82.
Ceus-2TX BAG0183.2 01.19 85