Amazone Ceus 4000-2TX, Руководство по эксплуатации

Страница: 69 / 132

Commissioning
6.1 Checking the suitability of the tractor
WARNING
Danger of breaking during operation, insufficient stability and
insufficient tractor steering and braking power in the event of
improper use of the tractor!
•
Check the suitability of your tractor before you attach or hook up
the machine.
You may only connect the machine to tractors suitable for the
purpose.
•
Carry out a brake test to check whether the tractor achieves the
required braking delay with the machine connected.
Requirements for the suitability of a tractor are, in particular:
•
The approved total weight
•
The approved axle loads
•
The load capacity of the installed tyres
You can find this data on the rating plate or in the vehicle docu-
mentation and in the tractor operating manual.
The front axle of the tractor must always be subjected to at least 20%
of the empty weight of the tractor.
The tractor must achieve the brake delay specified by the tractor
manufacturer, even with the machine connected.
6.1.1 Calculating the actual values for the total tractor weight, tractor axle loads
and load capacities, as well as the minimum ballast
The approved total tractor weight specified in the vehicle documenta-
tion must be greater than the sum of the
•
empty tractor weight
•
ballast weight and
•
machine's total weight when attached or supported weight when
hitched.
This note only applies to Germany:
If, having tried all possible alternatives, it is not possible to comply
with the axle loads and/or the approved total weight, then a survey by
an officially recognised motor traffic expert can, with the approval of
the tractor manufacturer, be used as a basis for the responsible au-
thority to issue an exceptional approval according to § 70 of the Ger-
man Regulations Authorising the Use of Vehicles for Road Traffic and
the required approval according to § 29, paragraph 3 of the German
Road Traffic Regulations.
Ceus-2TX BAG0183.2 01.19 69