Amazone AD 3000 Super Classic Line, Руководство по эксплуатации

Страница: 80 / 198

Structure and function
80
AD 3000 Super BAH0107-0 02.20
5.12.4 One-sided switching
Fig. 76
Figure (Fig. 72) shows examples for creating tramlines using tramline controls 4, 6 and 8.
During the first field pass, it may be necessary to operate the seed drill with half the working width
(part-width section). The coulters of the left half of the implement (see Fig. 76) do not deposit any seed
in the soil if field operation starts at the right field edge field and the seeding shaft is driven by the right
side of the implement. After the first field run, restore the full implement working width.
With the seeding shaft disengagement clutch
(Fig. 77), the left hand side of the seeding shaft
can be shut off and seed delivery to the coulters
can be interrupted. If the tramline seed metering
wheels should also not spread any seed, the
shutter slides for the tramline seed metering
wheels must be closed.
Fig. 77
Another option for creating tramlines with tramline controls 4, 6 and 8 is to begin with full working width
and creation of a tramline, see Fig. 76.
In this case, the cultivating implement works with half working width during the first field run.