manualshive.com logo in svg

Amazone AD 3000 Super Classic Line, Руководство по эксплуатации

Поделиться
Скачать
Amazone AD 3000 Super Classic Line Скачать руководство пользователя страница 161

 

 

 

Transportation

 

AD 3000 Super  BAH0107-0  02.20

 

161

 

 

Before driving off, read the section "Safety information for the 
operator" and check: 

 

that the permissible weight is not exceeded. 

 

that the supply lines are connected correctly 

 

the lighting system for damage, function and cleanliness. 

 

that the warning signs and yellow reflectors are clean and 
undamaged 

 

the hydraulic system for visible damage. 

 

the tractor parking brake must be released completely. 

 

 

WARNING 

Risk of being crushed, cut, caught, drawn in or struck if the 
implement is unintentionally released from its attached or 
hitched position. 

Before road transport, perform a visual check that the top and lower 
link pins are firmly secured with original linch pins against 
unintentional release. 

 

 

DANGER 

Risk of personal injury from cutting and impacts caused by 
unintentional lowering of the track marker during transportation. 

Before road transport, visually check that the track markers are 
secured in the transport position. 

 

 

DANGER 

The parking supports may not be inserted in the mounts on the 
seed drill during transport. 

The parking supports do not have a locking device. When transporting 
the combination, they can accidentally wander out of the mounts and 
cause serious accidents.  

 

Содержание AD 3000 Super Classic Line







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды