Amazone AD 3000 Super Classic Line, Руководство по эксплуатации

Страница: 140 / 198

Settings
140
AD 3000 Super BAH0107-0 02.20
13. The desired seed rate [kg/ha] is generally not achieved with the first calibration. Using the
calibration values from the first calibration, determine the required gearbox setting values for the
desired seed rate [kg/ha] using the calculating disc rule, see section "Determining the gearbox
setting using the calculating disc rule", page 140.
14. Repeat the calibration test until the desired seed rate is achieved.
15. Fasten the calibration trays to the seed hopper.
16. Slide the funnel rails upwards and lock them into place.
17. Clip the calibration crank into its transport bracket.
Repeat the calibration test again after approx. 2 ha.
8.6.1 Determining the gearbox setting using the calculating disc rule
Using the calculating disc rule and the calibration values from the first calibration, the required gearbox
setting value for the desired seed rate [kg/ha] can be quickly determined.
Example:

Gearbox setting value for the first calibration: ......................... 70

Calculated seed rate after the first calibration: ...................... 175 [kg/ha]

Desired seed rate: ............................................................... 125 [kg/ha].
1. Set the calibration values above one
another on the calculating disc rule:

Calculated seed rate
175 kg/ha (Fig. 174/A)

Gearbox setting value 70 (Fig. 174/B).
2. Read the gearbox setting value for the
desired seed rate:

Desired seed rate
125 kg/ha (Fig. 174/C)

Gearbox setting value 50 (Fig. 174/D).
3. Set the lever for the Vario gearbox to the
determined gearbox setting value and
repeat the calibration until the desired seed
rate is achieved.
Fig. 174