Amazone AD 3000 Super Classic Line Скачать руководство пользователя страница 106

Страница: 106 / 198

Coupling and uncoupling the implement

106

AD 3000 Super BAH0107-0 02.20

12. Raise the combination so that the parking

supports are just above the ground.

13. Remove the parking supports (Fig. 111/1).

14. Park the combination without parking

supports.

15. Apply the tractor parking brake, switch the

tractor engine off and remove the ignition
key.

Fig. 111

DANGER

Remove the parking supports immediately after coupling the
seed drill on the soil tillage implement.

The parking supports do not have a locking device. When transporting
the combination, they can accidentally wander out of the mounts and
cause serious accidents.

16. Align the pack top seed drill until straight by

adjusting the top link (Fig. 112/1).

Fig. 112

Содержание AD 3000 Super Classic Line







































































































































































































Результаты поиска

Содержание AD 3000 Super Classic Line

Отзывы:

Бренды по названию

Популярные бренды

Amazone AD 3000 Super Classic Line, Руководство по эксплуатации

Результаты поиска

Содержание AD 3000 Super Classic Line

Отзывы:

Бренды по названию

Популярные бренды