Amazone AD 3000 Super Classic Line, Руководство по эксплуатации

Страница: 137 / 198

Settings
AD 3000 Super BAH0107-0 02.20
137
8.6 Calibrating the seed rate
1. Couple the seeding combination to the tractor.
2. Park the combination on a level surface.
3. Secure the tractor against unintentional start-up
and unintentional rolling away.
4. Fill at least 1/3 of the seed hopper with seed (accordingly less for fine seed).
5. Place the calibration trays on the funnel rail, see section "Placing the calibration trays on the
funnel rail", page 129.
6. If the tramline counter shows the number "0" on the "" control terminal, set the tramline
counter to "1".
The tramline counter may not display "0" during the calibration test. If
necessary, advance the tramline counter.
If the tramline counters is on "0"

no seed is delivered by the tramline seed metering wheels.

an incorrect gearbox position is determined through incorrect
calibration values.
7. Undo the locking knob (Fig. 170/1).
8. Consult the following table (Fig. 171) for the
gearbox setting value for the first calibration
test.
9. Set the pointer (Fig. 170/2) of the gearbox
lever to the gearbox setting value.
10. Tighten the locking knob.
Fig. 170
Gearbox setting values for the first calibration test
Seeding with normal seed metering wheels: Gearbox setting “50”
Seeding with fine seed metering wheels: Gearbox setting “15”
Seeding with bean seed metering wheels: Gearbox setting “50”
Fig. 171