Altigen ACM 6.7, Руководство администратора

Страница: 253 / 470

Voice Mail for Mobile Extensions
MAXCS ACM 6.7 Administration Manual 239
Additional Configuration for MaxMobile Communicator
For mobile phones running MaxMobile Communicator, do the following:
• If MAXCS is behind NAT, configure the NAT router to forward TCP port 10080 and
10081 to MAXCS's private IP address, so the data access from a 3G network can
reach this server.
• Open firewall ports TCP 10080 and 10081 for both virtual public IP address and
private IP address.
•
Assign an Altigen MaxMobile license to the extension. To do this, from the MaxAdmin
main menu, select
License > Client SEAT License Management . In the Client
SEAT License Management dialog box, select MaxMobile in the License Types
column, and add the appropriate extension to the Members list
Voice Mail for Mobile Extensions
When the mobile extension phone is turned off or busy, messages can go to the
extension’s voice mail in MAXCS or to the mobile phone’s voice mail:
• To send a call to the mobile extension’s voice mail in MAXCS, check the Press any
key to answer call check box. If the mobile phone is running MaxMobile
Communicator, this check box should never be checked.
• To send a call to the mobile phone’s voice mail, the Press any key to answer call
check box must be un checked.
Mobile Extension Limitations
•
Only PRI mobile trunks can deliver Caller ID information to the mobile extension.
•
A mobile extension cannot support Centrex transfer.
•
After adjusting the number of mobile extension ports in a mobile extension board,
MAXCS must be restarted for the changes to take effect.
• Cannot deliver caller name to the mobile extension.
• Does not support Message Waiting Indicator on the mobile extension device. (Use
Message Notification as a work-around).
•
Since the DTMF key * is used for simulating the FLASH signal, there is no way to
send * to the system.
• The RNA for mobile extension may not be accurate, because the system ring count
may not be in sync with the mobile extension device ring count.
•
When placing calls to mobile extensions that are cell phones, if the cell phone is out
of signal range, the caller may hear long periods of silence. You can check the
Press
any key to answer call option to prevent this problem.
• Only analog trunks can be allocated as dedicated mobile trunks.