Altigen ACM 6.7, Руководство администратора

Страница: 20 / 470

Overview
6 MAXCS ACM 6.7 Administration Manual
Mobile Extension— allows a regular CO-connected PSTN phone, such as a home phone
or cell phone, to be used to simulate a PBX office extension. A Mobile Extension has most
of the PBX system’s call control and call center features. The trunk property is
dynamically changed between regular PSTN trunk and MobileExt trunk. The MobileExt
user has the option to press any digit to connect to a call. By pressing
** to end a call,
the system will simulate on-hook/off-hook sequence and play a dial tone to the
MobileExt user.
Multi-lingual support - supports multiple sets of system and custom language
phrases. Up to 9 different sets of language phrase can be configured. A language
preference tag can be assigned to the extension user or selected by the incoming caller.
The system plays the specified language when the extension user accesses system
features or the external caller reaches a voice mail box.
Multiple Call Waiting with Personalized Greetings— a personal queue that allows
users to handle multiple incoming calls by letting callers wait in queue until the user
answers the call. This allows users to transfer or park calls before answering the next
call in queue. Users may also record and use personalized
Initial and Subsequent
greetings to be played for callers in queue.
Music on Hold— allows callers to hear music or pre-recorded messages while waiting on
hold. Music source can be either from an external audio device connected to a telephony
board audio input port, or from a pre-recorded music file played by a VoIP board.
One Number Access— a feature that eliminates “telephone tag” by allowing the caller
to find the extension user through preset numbers, according to a designated schedule.
Setup is available through the One Number Access tab of Extension Configuration and/
or the MaxCommunicator and MaxAgent client applications. An
ONA password is
optional. The user can press any key to pick up an ONA call. ONA Call Screening allows
a user to enable a call screening option to ONA, where a caller is prompted to record a
caller name to continue ONA.
Operator Off-line —when this feature is enabled, all calls are directed to the AA. When
the caller dials 0 and the operator is not available, the call is routed to the operator
mailbox.
Out Call Routing Configuration —allows outgoing calls to be directed to particular
trunk routes, based on a configured dialing pattern.
Outside Call Blocking —when this feature is enabled, access to outside lines is
temporarily disallowed.
Paging (IP)— allows paging over IP to a group of internal IP phones.
Paging (analog trunk or station port) - allows paging through a Zone paging device
connected to an analog trunk or station port.
Paging (Audio-Out Port)— allows paging though a speaker connected to an audio
output port.
Personal Call Park and Pick Up— users can park calls at one station to be picked up
at another station. Up to 50 calls may be parked at one station simultaneously. Calls
parked to a group are protected.
Only group agents or the person who parked the call
can pick it up.
Single Call Waiting - allows users to put an existing call on soft hold and take a second
call upon hearing a Call Waiting tone. The user can then alternate between the two calls.
SIP Third-Party Devices —allows certified third-party SIP devices (for example, a 3rd
party IP phone) to register as an IP extension. Note : A license is required to enable this
feature for an extension. (Release 5.2)
Station Log In/Log Out - enables system users to move an extension number from
one station to another, or deactivate an extension.