Altigen ACM 6.7, Руководство администратора

Страница: 240 / 470

Configuring the AltiGen IP Phone
226 MAXCS ACM 6.7 Administration Manual
Note: The Copy From button allows you to copy Programmable Key settings from one
IP phone extension to another. No other settings are carried over.
Parameter Description
Program-
mable
Keys Use the drop-down list to assign one of the following functions to the
desired keys:
•
N/A
—
when selected, the corresponding programmable key cannot
be used.
• BLF (Busy Lamp Field)
—
when selected, enter an extension number
in the field below; this will be associated with the corresponding
programmable key to this extension number; the light in this
programmable key indicates that the extension number is busy or
ringing. You can select the
Play Beep Tone check box to also have
the IP phone play an audible beep or one of several different ring
tones when the extension number is ringing.
Note : The BLF feature can be assigned only to internal extension
numbers, not outside numbers.
• Feature Code
—
when selected, enter a MAXCS feature code in the
field below; this will be associated with the corresponding
programmable key to dial this feature code.
• Admin Defined # - when selected, this programmable key can be
configured by the administrator only. Enter a valid number 0~9, *, #,
or F (Flash) in the field below.
One use for this can be to tag a call with an account code by pressing
one button. For example, entering F#321 in programmable key 1 will
cause a connected call to be tagged with account code 1 (F is for
Flash, #32 is the extension feature code, and in this example, 1 is the
account code). Account codes are set up in System Configuration,
Account Code tab.
• Line Park - when selected, enter the Line Park line ID in the field
below. The user can press this programmable key to park a call or to
retrieve a parked call.
• Call Record - when selected, the user can press this programmable
key to start conversation call recording. This only works for
extensions with
Record on Demand selected in the Extension
Configuration window.
• WG Status - (IP710 only) When selected, the user can press this
programmable key to see the real-time workgroup status (callers in
queue, longest queue time, number of callers who have waited longer
than the service threshold, and service level).
• User Defined # - (Default) Allows the user to define the
programmable key from the IP phone.
• Headset
—
(Alti-IP 600, IP 705) When configured from the drop-
down list for programmable key 10 (Alti-IP 600) or programmable key
5 (IP 705), the IP phone user will be able to activate a third-party
headset (certified by AltiGen).
• Flash
—
(Alti-IP 600) Upon initial installation, the lower left
programmable key is set up as FLASH by default. This key can be re-
assigned in MaxAdmin, using the AltiGen IP Phone Configuration
window. No other programmable keys can be configured to FLASH.