hypercharger - Operation Instructions and Installation Guide
Version 1-1C
Page 42 of 57
6
Diagnosis
and parameterization
All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic s.r.l.
6.3. Parameterization
BOOT
Used to set up the main running parameters for the charging station. They are required to
b
e inserted manually. Click ‘Save Configuration’ when all parameters are typed.
Location:
Click on ‘OCPP’ from the main menu and following the top menu click on ‘BOOT’.
Figure 35 is an example of the webpage, please not that not all options are editable. When
some has been edited from the original configuration, it is marked with a light-blue
background.
Figure 35:
Example of BOOT Configuration webpage
