hypercharger - Operation Instructions and Installation Guide
Version 1-1C
3
Product
description
Page 23 of 57
All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic s.r.l.
Figure 17:
DC output power of the 75kW hypercharger
3.6.2. HYC_150 configuration
The hypercharger with 150kW has two built-in 75kW hypercharger power-stacks and can
charge up to two vehicles at the same time with DC when equipped with two DC outlets
(one per stack, maximum 75kW / vehicle, DC output power see Figure 17).
If a vehicle to be charged requires a charging power greater than 75kW, both hypercharger
power-stacks are to be switched to a DC outlet, which can than provide a charging power
of up to 150kW (DC output power see Figure 18). In addition, it is possible to have a 22kW
AC socket installed.
The following figure shows the DC output power of the 150kW hypercharger, where the
whole power is switched to one DC-outlet:
Figure 18:
DC output power of the 150kW hypercharger, whole DC-power on one outlet
