hypercharger - Operation Instructions and Installation Guide
Version 1-1C
Page 24 of 57
3
Product
description
All rights reserved. The reproduction of this document, also partially, is allowed only with authorization by alpitronic s.r.l.
Attention
The total performance of the 150kW hypercharger is limited to one 250A
grid connection.
3.6.3. HYC_225 configuration
The hypercharger with 225kW has three built-in 75kW hypercharger power-stack and can
charge two vehicle with DC at the same time. However, it is possible to equip a 225kW
hypercharger with two DC-outlets (CCS and CHAdeMO) where each vehicle can be
charged with a DC-outlet power. In addition, it is possible to have one 22kW AC socket
installed.
The following figure shows the DC output power of the 225kW hypercharger:
Figure 19:
DC output power of the 225kW hypercharger
3.6.4. HYC_300 configuration
The hypercharger with 300kW has four built-in 75kW hypercharger power-stacks and can
charge up to two vehicles at the same time with DC when equipped with two DC outlets.
If a vehicle to be charged requires a charging power greater than 75kW, multiple
hypercharger power-stacks can be switched to a DC outlet, which can than provide a
charging power of up to 2x150kW (DC output power see Figure 18) or 1x 300kW. In
addition, it is possible to have a 22kW AC socket installed.
The following figure shows the DC output power of the 300kW hypercharger, where the
whole power is switched to one DC-outlet:
