ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Страница: 73 / 102

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming Control
71
802953
How to Program Cycle Modifier C Option
“CnP4”
This option allows the owner to enable or disable the
Cycle Modifier C Option.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Cycle Modifier options until
“ CnP4 ” appears in the display.
2. When “ CnP4 ” appears in the display, press the
START (enter) keypad. A number will appear in
the display. This number corresponds to the
current Cycle Modifier C Option value. Refer to
Table 11 .
3. Locate the desired number in the first column of
Table 11 .
4. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
current number until correct.
NOTE: To go back to the current programmable
option without changing the value of the active
digit, press the DELICATES 30 (<) keypad.
5. Press the START (enter) keypad when the
desired number appears in the display. The next
Cycle Modifier option, “ CnP5 ”, will appear in
the display.
NOTE: To program “CnP5” (Cycle Modifier
Added Wash Time), continue to next Cycle
Modifier option. To program other options, press
the DELICATES 30 (<) keypad and refer to the
appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
How to Program Cycle Modifier Added
Wash Time “CnP5”
This option allows the owner to set the amount of
additional wash time for the B and C Cycle Modifier
Options. The Extra Wash option needs to be turned on
(refer to Cycle Modifier B and C options) for the
Cycle Modifier Added Wash Time to take effect.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Cycle Modifier options until
“ CnP5 ” appears in the display.
2. When “ CnP5 ” appears in the display, press the
START (enter) keypad. The current number of
minutes set for the Cycle Modifier Added Wash
Time will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
current number of minutes shown in the display
to the desired number of minutes.
NOTE: The Cycle Modifier Added Wash Time can
be set from zero “ 0 ” to 15 minutes. The factory
default setting is 2.
4. Press the START (enter) keypad when the
desired number of minutes appears in the display.
The next Cycle Modifier option, “ CnP1 ”
(software version “S 01”) or “ CnP6 ” (software
version “S 02” or higher), will appear in the
display.
NOTE: For software version “S 01”, to program
“droP” (Drop Off Mode) (on/off), press the
DELICATES 30 (<) keypad and refer to option 25 .
For software version “S 02” or higher, to program
“CnP6” (Default Cycle Modifier) continue to next
Cycle Modifier option. To program other options,
press the DELICATES 30 (<) keypad and refer to
the appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
>
<
>
<
>
<
>
<