ALLIANCE ST3LXFSP401NW22 Скачать руководство пользователя страница 48

Страница: 48 / 102

Programming Control

802953

16. Vend Price #5 “AtS5”

This option allows the owner to set the vend price for a

DELICATES 30 wash. This vend price will be shown

in the display when DELICATES 30 is selected.

How to Program the Vend Price #5

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad and

“

AtS1

” will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “

AtS5

” appears in

the display. The DELICATES 30 LED will be lit

to show which cycle/temperature price is being

programmed.

4. When “

AtS5

” appears in the display, press the

START (enter) keypad. There are five digits in

the Vend Price #5. The fifth digit will appear in

the display and will flash one second on, one

second off. Refer to

Figure 17

NOTE: If the vend price is 10000 or more, the fifth

digit is “

1-6

”. If the vend price is 9999 or less, the

fifth digit is “

”.

Figure 17

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

value of the fifth digit.

NOTE: The vend price can be set from 0 to 65,535.

The factory default setting is 200.

6. Press the START (enter) keypad to enter the fifth

digit and display remaining four digits. The

active digit will flash one second on and one

second off.

NOTE: To go back to the current programmable

option without changing the value, press the

DELICATES 30 (<) keypad.

7. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

value of the active digit and the START (enter)

keypad to enter the value of the digit and advance

to the next digit.

8. Press the START (enter) keypad with the last

active digit. The next option,

“

AtS6

”, will appear

in the display.

NOTE: To program

“AtS6”

(Vend Price #6), refer

option 17

. To program other options, refer to the

appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

CHM507R

Содержание ST3LXFSP401NW22







































































































Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды

ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды