ALLIANCE ST3LXFSP401NW22 Скачать руководство пользователя страница 83

Страница: 83 / 102

Programming Control

802953

31. IR Access (On/Off) “IrA”

This option allows the owner to enable or disable

allowing the control to be read by an external device.

How to Program the IR Access (On/Off)

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad and

“

AtS1

” will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “

IrA

” appears in the

display.

4. When “

IrA

” appears in the display, press the

START (enter) keypad. The current IR Access

status will appear in the display.

“

” = Option Enabled (factory default setting)

“

oFF

”= Option Disabled

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to change the current status.

6. Press the START (enter) keypad when the

desired status appears in the display. The next

option, “

rAEn

”, will appear in the display.

NOTE: To program

“rAEn”

(Manual Rapid

Advance [On/Off]), refer to

option 32

. To program

other options, refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

32. Manual Rapid Advance (On/Off)

“rAEn”

This option allows the owner to enable or disable the

rapid advance feature. Refer to

Rapid Advance

Feature

section for more information.

How to Program the Manual Rapid
Advance (On/Off)

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad and

“

AtS1

” will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “

rAEn

” appears in

the display.

4. When “

rAEn

” appears in the display, press the

START (enter) keypad. The current Manual

Rapid Advance status will appear in the display.

“

” = Option Enabled (factory default setting)

“

oFF

”= Option Disabled

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to change the current status.

6. Press the START (enter) keypad when the

desired status appears in the display. The next

option, “

dAEn

”, will appear in the display.

NOTE: To program

“dAEn”

(Manual Diagnostics

[On/Off]), refer to

option 33

. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

Содержание ST3LXFSP401NW22







































































































Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды

ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды