ALLIANCE ST3LXFSP401NW22 Скачать руководство пользователя страница 27

Страница: 27 / 102

Programming Control

802953

1. Vend Price #1 “AtS1”

This option allows the owner to set the vend price for a

NORMAL 90 wash. This vend price will be shown in

the display when NORMAL 90 is selected.

How to Program the Vend Price #1

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad.

3. “

AtS1

” will appear in the display. Press the

START (enter) keypad. The NORMAL 90 LED

will be lit to show which cycle/temperature price is

being programmed.

4. There are five digits in the Vend Price #1. The

fifth digit will appear in the display and will flash

one second on, one second off. Refer to

Figure

NOTE: If the vend price is 10000 or more, the fifth

digit is “

1-6

”. If the vend price is 9999 or less, the

fifth digit is “

”.

Figure 10

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

value of the fifth digit.

NOTE: The vend price can be set from 0 to 65,535.

The factory default setting is 200.

6. Press the START (enter) keypad to enter the fifth

digit and display remaining four digits. The

active digit will flash one second on and one

second off.

NOTE: To go back to the current programmable

option without changing the value, press the

DELICATES 30 (<) keypad.

7. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

value of the active digit and the START (enter)

keypad to enter the value of the digit and advance

to the next digit.

8. Press the START (enter) keypad with the last

active digit. The next option,

“

dEn1

”, will

appear in the display.

NOTE: To program

“dEn1”

(Coin #1 Value), refer

option 2

. To program other options, refer to the

appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

CHM507R

Содержание ST3LXFSP401NW22







































































































Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды

ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды