ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Страница: 71 / 102

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming Control
69
802953
How to Program Cycle Modifier C Price
“CnP2”
This price setting will be added to the current vend
price. For example, if the vend price is 200 and Cycle
Modifier C Price is set to 50, the total vend price when
the C Soil Level is chosen will be 250.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Cycle Modifier options until
“ CnP2 ” appears in the display.
2. When “ CnP2 ” appears in the display, press the
START (enter) keypad. There are five digits in
the Cycle Modifier C Price. The fifth digit will
appear in the display and will flash for one
second on, one second off. Refer to Figure 26 .
NOTE: If the vend price is 10000 or more, the fifth
digit is “ 1-6 ”. If the vend price is 9999 or less, the
fifth digit is “ 0 ”.
Figure 26
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
value of the fifth digit.
NOTE: The vend price can be set from 0 to 65,535.
The factory default setting is 50.
4. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE: To go back to the current programmable
option without changing the value, press the
DELICATES 30 (<) keypad.
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
value of the active digit and the START (enter)
keypad to enter the value of the digit and advance
to the next digit.
6. Press the START (enter) keypad with the last
active digit. The next Cycle Modifier option,
“ CnP3 ”, will appear in the display.
NOTE: To program “CnP3” (Cycle Modifier B
Option), continue to next Cycle Modifier option. To
program other options, press the DELICATES
30 (<) keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
CHM507R
>
<
>
<
>
<