ALLIANCE ST3LXFSP401NW22 Скачать руководство пользователя страница 75

Страница: 75 / 102

Programming Control

802953

24. Cycle Time Display “PCt-”

(software version “S 02” or
higher only)

This option allows the owner to program the machine

to display a chosen cycle time in minutes instead of

the calculated cycle time.
The cycle time display will not pause for fills or

heating. The display will switch to 01 if the breakaway

step is reached before the time display reaches 01. If

the time displayed reaches 01 before the breakaway

step, the display will pause at 01 until the cycle ends.

How to Program Cycle Time Display
Enable “PCtE”

This option allows the owner to enable or disable the

Cycle Time Display.

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad and

“

AtS1

” will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “

PCt-

” appears in

the display. Press the START (enter) keypad and

“

PCtE

” will appear in the display.

4. When “

PCtE

” appears in the display, press the

START (enter) keypad. The current Cycle Time

Display Enable status will appear in the display.

“

” = Option Enabled

“

oFF

” = Option Disabled (factory default

setting)

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to change the current status.

6. Press the START (enter) keypad when the

desired status appears in the display.

7. Press the START (enter) keypad with the last

active digit. The next Cycle Time Display

option,“

PCt1

”, will appear in the display.

NOTE: To program

“PCt1”

(Cycle #1 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

How to Program Cycle #1 Time “PCt1”

This option allows the owner to set the Cycle #1 Time

display.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Cycle Time Display options until

“

PCt1

” appears in the display.

2. When “

PCt1

” appears in the display, press the

START (enter) keypad. The current Cycle #1

Time is displayed.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

current number of minutes to the desired number

of minutes.

NOTE: The Cycle #1 Time can be set from 0 to 255.

The factory default setting is 34.

4. Press the START (enter) keypad when the

desired number of minutes appears in the display.

5. The next Cycle Time Display option, “

PCt2

”,

will appear in the display.

NOTE: To program

“PCt2”

(Cycle #2 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

Содержание ST3LXFSP401NW22







































































































Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды

ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Результаты поиска

Содержание ST3LXFSP401NW22

Отзывы:

Похожие инструкции для ST3LXFSP401NW22

Бренды по названию

Популярные бренды