ALLIANCE ST3LXFSP401NW22, Руководство по программированию

Страница: 70 / 102

Programming Control
802953 68 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
23. Cycle Modifier Programming
“CnP-”
This option allows the owner to program the machine
to offer an added prewash, extra wash time, an added
extra rinse, a warm rinse, or any combination of the
above to the customers for an added vend price. This
option is selected when B or C is selected using the
SOIL LEVEL keypad.
How to Program Cycle Modifier B Price
“CnP1”
This price setting will be added to the current vend
price. For example, if the vend price is 200 and Cycle
Modifier B Price is set to 50, the total vend price when
the B Soil Level is chosen will be 250.
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode .
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until “ Prog ” appears in the
display. Press the START (enter) keypad and
“ AtS1 ” will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable options until “ CnP- ” appears in
the display. Press the START (enter) keypad and
“ CnP1 ” will appear in the display.
4. When “ CnP1 ” appears in the display, press the
START (enter) keypad. There are five digits in
the Cycle Modifier B Price. The fifth digit will
appear in the display and will flash for one
second on, one second off. Refer to Figure 25 .
NOTE: If the vend price is 10000 or more, the fifth
digit is “ 1-6 ”. If the vend price is 9999 or less, the
fifth digit is “ 0 ”.
Figure 25
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
value of the fifth digit.
NOTE: The vend price can be set from 0 to 65,535.
The factory default setting is 25.
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE: To go back to the current programmable
option without changing the value, press the
DELICATES 30 (<) keypad.
7. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
value of the active digit and the START (enter)
keypad to enter the value of the digit and advance
to the next digit.
8. Press the START (enter) keypad with the last
active digit. The next Cycle Modifier option,
“ CnP2 ”, will appear in the display.
NOTE: To program
“CnP2”
(Cycle Modifier C
Price), continue to next Cycle Modifier option. To
program other options, press the DELICATES
30 (<) keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
>
<
>
<
CHM507R
>
<
>
<