Manual
TdC 8001
-31-
4.3.2.4
Edit Run, Memory and Intermediate Times
In order to enter the edit menu for run, memory and intermediate times, press both <MENU> and <IN-
PUT> (of finish keypad 8).
−
Press both <MENU> and <INPUT>.
−
The following shows on the info display (7):
Input times:
RUN TIME<
F1
change the run time
MEMORY TIME
F2
change the memory time
INTERMEDIATE TIME
F3 change intermediate time
Continue: ENTER
−
Select desired time with F1, F2, F3 or
and
.
−
Execute the changes as described in the following three chapters.
−
Press both <MENU> and <INPUT> to leave the menu.
4.3.2.4.1
Change Run Time
You can edit the following:
−
Overwriting the run time with finish keypad (12)
−
Copy run time to another start number
−
Disqualify a competitor
Change run times:
−
Press both <MENU> and <INPUT>
−
Press <F1> and then <ENTER>
−
The info display show the current run time of the start number shown on finish display (6):
Input: 0015 RT 00:01:35.139
NEW No
F1 e. g. start number 15
DISQU.
F2
−
The cursor blinks at the last digit of the start number.
−
For editing another start number input it directly or select with
and
.
−
When the correct start number shows, press <ENTER> (finish keypad 8).
−
If this start number already has several times, the info display (7) shows as follows:
Input: 0015 LZ 00:01:35.139
NEW No
F1 The currently valid time can be
DISQU.
F2 overwritten.
−
You can overwrite the time with the number keys of keypad (8) (manual input of run time).
−
If you want to assign the marked run time also to another start number, press <F1> and input
the new start number.
−
You can disqualify a competitor with <F2>; start, finish and run time of the disqualified competitor
are invalidated.
−
Leave the menu by pressing both <MENU> and <INPUT> on finish keypad (8).
Attention: A run time of 00:00:00.00 means that no finish time has been assigned to this start number
yet. An overwritten run time is marked with c, e. g.
c0009 LZ 00:01:35.139
Содержание TDC8001
