ALGE-Timing TDC8001, Руководство пользователя

Страница: 45 / 112

Manual
TdC 8001
-45-
Handicap Time Menu 22 Default = 00:00:00.00
Percentage that indicates how much the measured time is faster or slower than the handicap time. The
handicap is deactivated if not time is input (00:00:00.00).
Menu 22: HANDICAP TIME = 00:00:00.00 enter handicap time
(no function yet)
Save with: ENTER
Printout:
0012 ST 10:58:11.320
start time
FT 10:58:41.693 finish time
RT 0:30.37 run time
HANDICAP: +001.60%
handicap
Input of Groups Menu 23 Default = OFF
For showing ranks withing groups, the groups have to be entered during turn-on procedure or later here.
Already entered groups can be edited in this main menu.
Menu 23: GROUPS GR: 1> 0 enter last number of group
Save with: ENTER confirm selection with <ENTER>
−
Enter last start number of 1
st
group
− Press ENTER
− Enter last start number of 2
nd
group
−
Press ENTER
−
Continue identically until the last group
− After the last group confirm with 2 x ENTER
Attention: For post-nominations sufficient start numbers per group should stay vacant.
Change Heat Menu 24
The TdC 8001 can stay turned-on to change the heat.
Menu 24: SELECT HEAT SAME (1)< F1 continue in same heat
NEXT (2) F2 select new heat
Continue: ENTER exit with <ENTER>
Attention: If the next heat is selected you cannot return to previous heat.
Change Race Menu 25
The TdC 8001 can stay turned on for changing from one race to another. With <YES> or <ENTER> a
new race can be selected. The same menus as when switching-on appears. The previous synchroniza-
tion is kept.
Display Board Test Menu 26 Default = OFF
For testing the display board and for displaying the time of day, blank or
ALGE
during a break. In case
the display board has digits that do not work properly, this test should be executed. If digits are defective
the corresponding segments can be determined. The test with “eights” is recommended after a long still
stand or at low temperatures.
With <F1> to <F4> the desired test mode can be set. An arrow in the display indicates the currently
running GAZ test. There are a total of seven display possibilities. Abort the GAZ test with <ENTER>.
Menu 26: D-BOARD-TEST TIME < F1 day time is displayed
ALGE
F2
ALGE
is displayed
BLANK F3 blank
Continue: ENTER 123456789 F4 test all 9 possible digits