ALGE-Timing TDC8001, Руководство пользователя

Страница: 74 / 112

Manual
TdC 8001
-74-
6.5 Speed, Program 7
With this program the speed can be measured on a defined measuring distance (two photocells or other
impulse devices)
measurement: adjustable in km/h, m/s or mph
measuring distance: adjustable from 1 to 9999 m
minimum speed: adjustable from 1 t 9999 km/h, m/s or mph
maximum speed: adjustable from 1 to 9999 km/h, m/s or mph
channels: channel c0 and c1 (passage possible from both directions)
Activation procedure:
−
turn-on TdC 8001 (switch g).
− select program 7 „speed“ cursor keys and <ENTER>
− clear memory for used race and <ENTER>
−
select race and <ENTER>
−
press <YES> for entering groups, otherwise <NO> and <ENTER>
− when entering groups always enter last number of a group
− confirm every input with <ENTER>
−
after start number of last group press <ENTER>
−
synchronize TdC 8001 (possibly with other
ALGE
timing devices)
−
press <F1> for confirming displayed time of day
−
with next full minute start impulse is send via channel c0
− TdC 8001 is ready for timing
− press <F2> if display (5) shows wrong time of day
−
enter time with keypad (8), confirm with <ENTER>
−
start clock with start signal (<START> or channel c0)
Race procedure:
−
enter * and + on keypad (9), middle segment of display (1) is at the top
−
press <MENU> and <ALT> at the same time
− set measuring distance in menu 32
− select unit in menu 33
−
set minimum speed in menu 34
−
set maximum speed in menu 35
− set if start number automatic is to be used in menu 4 (display time 1)
− select START or FINISH in menu 12 (start number automatic) if the measured value is only to
be displayed for a certain time (display time 1)
−
enter start number with start keypad (12) or finish keypad (8) and <ENTER>