background image

24 HR. OUTDOOR TIMER

TO SET TIMER: 

1. Insert ON (GREEN) and OFF (RED)  trippers

into dial at desired ON and OFF times.

2. Turn dial CLOCKWISE              one or  more

complete revolutions until the arrowhead is

aligned with time-of-day (AM or PM) in window.

3. Turn lamp or appliance ON.
4. Plug extension cord, lamp or appliance into

timers receptacle and plug timer cord into

wall outlet, suitable for "wet locations" if outdoors.
FOR EARLY ON OR OFF OPERATION, Turn manual knob counter
clockwise                

to desired ON or OFF position, Timer will follow

next scheduled automatic operation. 

IN CASE OF POWER FAILURE, RESET TIMER, (SEE STEP 2)

WARNING: To avoid shock hazard, timer must be installed VERTICAL-
LY and at least 3 ft. ABOVE ground level. WATTAGE OF LAMPS OR
APPLIANCES BEING CONTROLLED SHOULD NOT EXCEED
CAPACITY OF TIMER. WHEN USED WITH EXTENSION CORD OR
DEVICES DO NOT EXCEED THEIR RATING OR 10 AMPS.

MODEL: HB35R

10 AMP (1200 WATT) RESISTIVE; 10 AMP

(1200 WATT) TUNGSTEN; 10 FLA (60 LRA) MOTOR-120 VOLT 60 HZ.

INTERMATIC INCORPORATED

154HB22147                        

LR3730

TIME-OF-DAY ARROW

MANUAL KNOB

ON TRIPPER GREEN

OFF TRIPPER RED

Document1  11/19/02  8:48 AM  Page 1

Отзывы: