ALGE-Timing TDC8001, Руководство пользователя

Страница: 71 / 112

Manual
TdC 8001
-71-
−
enter start number for red (right) course with keypad (8) and confirm with <ENTER>
− display (6) must show start number (and group) of red (right) course
− info display (7) must show the start number of blue (left) and red (right) course as well as ap-
propriate time
−
in main menu (<ALT> and <MENU>) can be set if the start takes place for both courses at the
same time or separately (menu 29: start channel 28)
− start impuls for number 1 executed
−
start impuls for number 2 executed
−
info display (7) must show start number of blue (left) and red (right) course as well as the ap-
propriate run time.
− The start numbers for the next competitor pair can be entered as before
Race procedure in 2 nd heat:
change heat:
− all competitors must have finished the 1
st
heat
−
press <ALT> and <MENU> at the same time
−
enter number 23 with finish keypad (8)
− info display (7) now shows “change heat”
−
press <YES>
−
press <F2> to select next heat
−
Confirm with <ENTER>, heat is changed
The pairs of the 2
nd
heat do not have to be the same as before, but every competitor has to change
course. Start numbers that used blue course in 1
st
heat cannot be entered for blue course in 2
nd
heat.
The same applies for red course.
−
enter start number for blue (left) course with keypad (12)
− <ENTER>
− display (1) must show start number of blue (left) course
−
enter start number for red (right) course with keypad (8)
−
<ENTER>
− display (6) must show start number of red (right) course
−
info display (7) must show start numbers of blue (left) and red (right) course as well as corre-
sponding 0:00.00 (can also be changed to total time)
− start impulse for both competitors carried out separately or at the same time (setting menu 29)
− displays (1) and (6) must show start number and “b” (b = occupied)
−
info display (7) must show start numbers of blue (left) and red (right) course as well as corre-
sponding running time
− finish impulse for number 1 effected
− finish impulse for number 2 effected
−
info display (7) must show start number of blue (left) and red (right) course as well as corre-
sponding run time
− with end of display time the total net time of both competitors is automatically displayed
− start numbers for the next couple of competitors can be entered
Clear finish times:
By pressing <CLEAR> of keypad (12) the finish impulses of the blue (left) course can be cleared. If
<ALT> and <CLEAR> are pressed at the same time, the previously cleared finish time is used once
again as current finish time.
The same can be done for the red (right) course on keypad (8).
Block finish times:
The finish time of each course can separately be blocked.
Press <BLOCK> of keypad (12) to print finish time of blue (left) course (c4) as invalid (time of day with ?).
Press <BLOCK> of keypad (8) to print time of red (right) course (c1) as invalid (time of day with ?).
Pressing <ALT> and <BLOCK> at the same time results in the impulse being swallowed.