ALGE-Timing TDC8001, Руководство пользователя

Страница: 22 / 112

Manual
TdC 8001
-22-
− Start number:
The start order can be set with menu 53 - as for the 1. heat (count
up, manual, count down)
−
Bibo without groups:
The start order for all competitors is according to Bibo. Enter number
of competitors to be inverted and confirm with <ENTER>.
− Bibo with groups:
The start order for every group is according to Bibo. Enter number
of competitors to be inverted for every group, confirm: <ENTER>.
− TdC 8001 is ready for next heat.
Change heat by turning off the TdC 8001:
Advantage: The batteries are preserved.
Disadvantage: The TdC 8001 and other timing devices (start clock, auxiliary timing, etc.) must be re-
synchronized.
In case a heat has already been carried out, you follow the same procedure for all following heats.
If you change from one heat to the next, turn the TdC 8001 off and on with switch (g). You must not clear
the memory of the race in which the previous heat is saved.
−
Turn on as with 1. heat
− Attention: do not clear the race for which the 2. heat is carried out
− Select correct race
−
The info display (7) shows the following:
Select heat: SAME (1) <
F1 continue in same heat
NEXT (2) F2 next heat
Continue: ENTER
− Select next heat with <F2> and <ENTER>. The number in parentheses shows which heat.
Start order: START NUMBER <
F1
BIBO WITHOUT GROUPS F2
BIBO WITH GROUPS
F3
Continue: ENTER
− Start number:
Set the start order – as for the 1. heat – with menu 53 (count up,
manual, count down)
− Bibo without groups: Start order for all competitors according to Bibo. Set the number
of competitors to be inverted and confirm with <ENTER>.
− Bibo with groups:
Start order for each group acc. to Bibo. Set number of competi-
tors to be inverted for each group, confirm with <ENTER>.
− Synchronization of the TdC 8001:
Time: 10:15:23 OK < F1 time and date are correct
Date: 11-02-28 WRONG F2 time or date is wrong
Continue: ENTER
−
The synchronization can be executed in two different ways. Select with <F1> or <F2> (see
chapter 2.11)
− The TdC 8001 is ready for the next heat.