ALGE-Timing TDC8001, Руководство пользователя

Страница: 94 / 112

Manual
TdC 8001
-94-
6.11 Cycling, Program 13
6.11.1 Road Races, Program 131
The program dual timer was changed for road races. At the start the run time for all racers is shown.
When the first cyclist finishes the time stops for him. On the display board the winner run time and the
average speed is displayed. At the same time the clock starts for another display board on which the lag
is shown for the other cyclists. This program can also be used for running events, triathlon etc.
Attention: channel c1 and c3 or c4 and c0 must be shorted with banana plugs.
Activation procedure:
−
turn on TdC 8001 (switch g)
−
select program cycling with cursor keys, <ENTER>
− select program cycling road with cursor keys, <ENTER>
− clear memory for used race, <ENTER>
−
select race, <ENTER>
−
select precision, <ENTER>
− press <YES> for entering groups otherwise <NO> and <ENTER>
− when entering groups always enter the last number of a group
−
confirm every input with <ENTER>
−
after the start number of the last group is entered, press <ENTER>
− synchronize TdC 8001 (possibly with other timing devices)
−
press <F1> to confirm indicated time of day
−
at next full minute a start impulse is issued via channel c0
−
TdC 8001 is ready for timing
− press <F2> if display (5) shows wrong time of day
− enter time with finish keypad (8) and confirm with <ENTER>
−
start clock with start signal (<START> or channel c0)
−
Race procedure:
−
short channel c1 and c3
− press <ALT> and <MENU> at the same time
−
select menu 32 „DISTANCE“ and <YES>
−
enter length of course (from start to finish), <ENTER>
− enter number on keypad (8), <ENTER>
− enter number on start keypad (12), <ENTER>
−
start race via channel c0
−
the lower time start to run on info display (7)
− finish impulse for winner must be received via channel c1 or c3
− lower time in display stops, next to it average speed is shown
−
simultaneously time of no. 2 is started, this time indicates lag of following cyclists
−
with channel c4 lag time can be stopped
− press <CLEAR> (start keypad (9)) for lag time continuation
− etc.
Clear times:
Press <CLEAR> of keypad (12 or 8) to stop the corresponding finish impulse or lag time. With <ALT>
and <CLEAR> the previously cleared finish time (lag time) can be restored.
Block times:
The finish time (lag time) can be blocked. Press <BLOCK> of keypad (12 or 8) to print the corresponding
time as invalid (time of day with ?). With <ALT> and <BLOCK> the corresponding impulse is swallowed.
Edit times:
The times can be copied from one start number to another, invalid can be made valid or manually en-
tered. <INPUT> of keypad (12 or 8) is used.
− <INPUT> changes finish or lag time
− <ALT> and <INPUT> changes start time for run or lag time