Manual
TdC 8001
-53-
6.1 Split, Program 1
Net timing for competitions with any
number of competitors started the
race (mass start or individual start, e.
g. alpine skiing, Nordic skiing, cy-
cling individual time trial). One start
channel, one finish channel and up
to 8 intermediate time channels are
available.
Split allows executing up to 256
heats.
You can set for the 2
nd
and following
heats if the time is started from
0:00.00 or the total time of the previ-
ous heat.
Example: alpine or nordic
TdC 8001 is connected with the two-
core connection wire to the Start-
gate. Via the speech connection the
start can contact the TdC 8001 user.
In the finish a photocell is used and
connected with cable 001-10 to the
TdC 8001.
The display board GAZ can show
start number run time and rank for
the audience.
Additional photocells can be con-
nected for intermediate times.
Activation procedure:
−
Turn on TdC 8001 (switch g).
−
Select program SPLIT with cursor keys, <ENTER>
−
Clear memory for race that is used (e. g. <F1> race 1), <ENTER>
−
Select race, <ENTER>
−
Select precision, <ENTER>
−
Select timing mode, <ENTER>
−
Select start mode, <ENTER>
−
Press <YES> for input of groups, otherwise <NO> and <ENTER>
−
Enter last number of group when using groups
−
Confirm every input with <ENTER>
−
Press <ENTER> after input of start number of last group
−
Synchronize TdC 8001 (possibly with other timing devices)
−
<F1> to accept displayed time of day
−
The next full minute, channel c0 outputs a start impulse
−
TdC 8001 is ready for timing
−
<F2> if display (5) shows incorrect time of day
−
Enter time with finish keypad (8) and confirm with <ENTER>
−
Start the clock with a start signal (<START> or channel c0)
Race procedure:
−
Enter * and + on keypad (9), middle segment in display (1) is at the top
−
Enter start number for start with start keypad (12), <ENTER>
−
Display (1) must show correct start number (and group)
−
Enter start number for finish with finish keypad (8), <ENTER>
−
Display (6) must show the correct start number (and group)
−
Start impulse for number 1 is effected
−
Display (5) shows running time
−
Display (1) automatically jumps to next start number
Содержание TDC8001
