ALGE-Timing TDC8001, Руководство пользователя

Страница: 25 / 112

Manual
TdC 8001
-25-
3.3 Start Mode
There are three different start modes:
−
Single start : every competitor has a separate start time
−
Group start
: every group has a separate start time (within the group one start time)
− Mass start : all competitors start at the same time (same start time)
You can set the mode of the automatic stepping with menu 53. The set value is also indicated on the
start display by a beam.
Beam functions:
− At the top: after the start the start number jumps up to the next start number that has not yet
started
−
In the middle: manual mode, every start number has to be entered with the start keypad (12)
− At the bottom: after the start the start number jumps down to the next start number that has not
yet started
ATTENTION: Set the start number in the start display on 0 to deactivate the automatic stepping.
3.3.1 Single Start
Every competitor has a separate start time, i.e. one competitor starts after the other. The output mode
of the info display (7) can be set for single starts (see menu 7: info display).
3.3.1.1
Start Procedure for 1. Heat:
The start procedure can be atomized if the start order corresponds to the start numbers.
Start numbers count automatically up after every start:
− Set menu 53 on upwards (setting is shown on display (2))
−
Display (1) shows 1 as start number
−
After every further start, the start number is increased (automatically to the next number that
has not yet started)
− A manual correction is always possible. Press <ENTER> to increase the start number.
−
Display (1) shows a “b” next to the start number if this one is started.
Start numbers count automatically down after every start:
− Set menu 53 on downwards (setting is shown on display (2))
− Display (1) shows 1 as start number
−
Set start number that starts first (e. g. 48) and confirm with <ENTER>
− After the start, the start number is decreased (automatically to the next number that has not yet
started)
−
A manual correction is always possible. Press <ENTER> to decrease the start number.
−
Display (1) shows a “b” next to the start number if this one is started.
Manual start number input:
− Set menu 53 on middle (setting is shown on display (2))
−
Enter start number with keypad (12) that starts first (e. g. 12) and confirm with <ENTER>
−
After the start, a “b” shows next to the start number indicating that it has started
− Enter next start number and confirm with <ENTER>.
− After the start, a “b” shows next to the start number indicating that it has started