ALGE-Timing TDC8001, Руководство пользователя

Страница: 20 / 112

Manual
TdC 8001
-20-
Select timing: ABSOLUTE F1 Timing without time of days
DIFFERENCE < F2 Timing with time of days
Continue: ENTER
- Select timing mode with <F1> or <F2> (see chapter 2.8)
- After the timing mode, the start mode must be selected:
Select start mode: SINGLE START < F1 every competitor start individually
GROUP START F2 mass start within a group
MASS START
F3 all competitors start at the same time
Continue: ENTER
- Select start mode with F-keys 1-3 (see chapter 0)
- Confirm start mode with <ENTER>.
- After the start mode the groups have to be defined:
Enter groups? YES F1
NO < F2
Continue: ENTER
- For entering groups press <YES> or <F1>, for no groups press <NO> or <F2>.
- When groups are entered, the info display (7) shows the following:
GROUPS: Gr 1: 1 > 50
The last start number of each group has to
Gr 2: 51 > 100 be entered. In case three groups are entered
Gr 1: 101 > 230
as shown here, for the fourth group press two
Save with: ENTER Gr 4: 231 > 0 times <ENTER>
- After the groups, the time of day has to be entered:
Time: 10:25:36 OK < F1 internal clock
Date: 11-02-2 WRONG F2 enter time of day
Continue: ENTER
confirm with <ENTER>
- You can enter the time of day in two ways (see chapter 2.11)
- Internal clock and manual synchronization
o
Internal clock:

press <F1>

press <ENTER>
o
waiting for synchronous pulse (daytime in the info display)

manual synchronization: − <F2> Press − <ENTER> Press

enter time with finish keyboard (8)

press <ENTER>

enter date with finish keyboard (8)

press <ENTER>

start signal with the <Start> key or by external start impulse (channel 0)
- After setting the time of day the TdC 8001 is ready for the start of the first competitor.
- For every competitor the following times are printed:
0001 SZ 10:07:04.640 start time
ZZ 10:08:35.150
finish time
LZ 1:30.500 run time