ALGE-Timing TDC8001, Руководство пользователя

Страница: 23 / 112

Manual
TdC 8001
-23-
3.2 Keypad Functions
The TdC 8001 has three keypads: - start keypad (12)
- finish keypad (8)
- function keypad (9)
Because of this layout, two persons can work at the TdC 8001 at the same time. One person can execute
the start while the second person is responsible for the finish. The start keypad is assigned to display
(1), the finish keypad to displays (5) and (6). The function keypad has functions that can be used with
both start and finish keypad. Information is shown on info display (7).
3.2.1 Start Keypad (12)
Manual start impulse (SZM at printer Drucker, C0M at RS232), precision only 1/1200 sec-
onds
The start time of the set start number on start display (1) is cleared. Pressing both keys
<ALT> and <CLEAR> at the same time restores the cleared start time.
As long as key <BLOCK> is pressed, all start impulses (channel 0) are indicated as invalid and
output with question mark. As long as keys <ALT> and <BLOCK> are pressed at the same
time, alle start impulses (channel 0) are ignored.
Keys to enter the start number at the start. The start number is shown on start display (1).
For entering (editing) the start time of the set start number on start display (1). In order to
go to the input menu the keys <MENU> and >INPUT> have to be pressed at the same time.
You can enter “Single” or “Interval”.
Every start number input must be confirmed with <ENTER>. According to the segment
shown in display (1) the start number counts automatically up or down or has to be done
manually.
3.2.2 Finish Keypad (8)
Manual stop impulse (channel ZZM at printer, C1M at RS232), precision only 1/100 seconds
The finish time of the start number shown on finish display (6) is cleared. Pressing <ALT>
and <CLEAR> at the same time restores the cleared finish time.
As long as <BLOCK> is pressed, all finish impulses (channel 1) are indicated as invalid and
output with a question mark. The run time does not stop. As long as <ALT> and <BLOCK> are
pressed, all finish impulses (channel 1) are ignored.
Keys to enter the start number in the finish. The start number is shown on the finish display
(6).
For entering (editing) the finish time of the set start number on the finish display (6), press
<MENU> and <INPUT> at the same time to go to the input menu for run times, memory
times and intermediate times.
Confirm every input of start numbers with <ENTER>. Start number stepping upwards: <EN-
TER>, start number stepping downwards: <ALT> and <ENTER>