Manual
TdC 8001
-91-
Used impulse channels:
start channel
c0 cable 000-xx (or cable reel) (jack h – c0)
photocell inside lane
c1 cable 001-xx (jack A or A') or 000-xx (jack h – c1)
photocell outside lane
c4 cable 001-xx (jack B) or 000-xx (jack h – c4)
Change of lanes:
The change of lanes was integrated in the TdC 8001 software. Only in case of a lapping or when a
competitor does not reach the finish, this must be entered into the TdC 8001 (see below).
Lapping:
When a competitor laps another, press <MEMO> and enter the next times manually with <INPUT>.
Competitor does not reach the finish (give-up or falls):
When a competitor does not reach the finish it has to be entered into TdC 8001. Press <ALT> and
<ENTER> (on keypad of dropped out competitor) so that for the rest of the race the lane changes are
correctly assigned to the remaining competitor.
Lane is not occupied at the start:
If a lane stays free at the start, start number 0 and <ENTER> has to be entered. Then, no start number
is shown for this lane. The impulse selection is effected automatically.
Activation procedure:
−
turn on TdC 8001 (switch g)
−
select program 12 – speed skating with cursor keys, <ENTER>
−
clear memory for used race, <ENTER>
−
select race, <ENTER>
−
synchronize TdC 8001 (possibly with other timing devices)
−
press <F1> to confirm the indicated time of day
−
at next full minute a start impulse is issued via channel c0
−
TdC 8001 is ready for timing
−
press <F2> is display (5) shows wrong time of day
−
enter time with finish keypad (8) and confirm with <ENTER>
−
start clock with start signal (<START> or channel c0)
−
selection
−
NEW – a new race is started
−
OLD – timing of existing race is continued
−
TDC-MENU – TdC Menu is opened
−
CLEAR – memory is cleared
−
select race distance with cursor keys
−
TdC 8001 is ready for the race
Race procedure:
−
enter start number of inside lane competitor with keypad (12)
−
confirm with <ENTER>
−
enter start number of outside lane competitor with keypad (8)
−
confirm with <ENTER>
−
enter start number 0 for a free lane
The impulses are automatically received correctly as long as both competitors reach the finish and no
lapping occurs.
Info display (7) shows all times of the race. The left side shows information for the inside lane competitor,
the right one for the outside lane competitor. You can browse with the cursor keys between the times.
On the right of the time is always the distance at which the time is measured. At the run time the total
rank is displayed.
If both competitors reach the finish, the start numbers for the next competitor couple can be entered.
General information for use:
start keypad (12):
to enter the start number for inside lane competitor
finish keypad (8):
to enter the start number for the outside lane competitor
cursor keys:
to move the cursor in info display (7)
<START>:
manual start impulse (both lanes) and manual stop impulse for inside
lane
Содержание TDC8001
