Manual
TdC 8001
-103-
xNNNNiTTxxHH:MM:SS.zhtqx##(CR)
parallel slalom, total time
xNNNNiDTT.HH:MM:SS.zhtxx##(CR)
parallel slalom, total difference time
pNNNNiCCxxHH:MM:SS.zhtqx##(CR)
parallel slalom, finish time calculated from penalty time
pNNNNiRTxxHH:MM:SS.zhtqx##(CR)
parallel slalom, run time calculated from penalty time
pNNNNiTTxxHH:MM:SS.zhtqx##(CR)
parallel slalom, total time calculated from penalty time
xNNNNxkmhxxxxsssss.ssxxxGR(CR)
speed measurement
xNNNNxkmhxxxxsssss.ssxxxxx(CR)
speed measurement at speed skiing
?NNNNxCCxxHH:MM:SS.zhtqxGR(CR)
invalid time
bNNNNxCCxxHH:MM:SS.zhtqxGR(CR)
time with Block-key ignored
m0000xCCxxHH:MM:SS.zhtqxGR(CR)
times of memo mode without assigned start number
cNNNNxCCxxHH:MM:SS.zhtqxGR(CR)
cleared time
dNNNNxCCxxHH:MM:SS.zhtqxGR(CR)
disqualified time
iNNNNxCCxxHH:MM:SS.zhtqxGR(CR)
edited (INPUT) time
xxxxxxC0xxHH:MM:SS.zhtqxGR(CR)
start time for group starts
xNHH:MM:SS.zhtxxGR(CR)
stopped countdown time (allowed)
xNNNNxRTx-HH:MM:SS.zhtxxGR(CR)
stopped countdown time (under allowed time)
nNNN(CR)
start number input with keypad
x ................................ blank
NNNN ....................... start number (4-digit)
0000 .......................... start number 0 always for times in memo mode
i ................................. identification of course with dual timer
CC ............................. channels of timing device
CCM .......................... manual impulse (with <START> or <STOP> of keypad 12 or 8)
C0 ............................. channel 0 (start channel)
C1 ............................. channel 1 (finish channel)
C2 ............................. channel 2 (intermediate time)
C3 ............................. channel 3
C4 ............................. channel 4
C5 ............................. channel 5
C6 ............................. channel 6
C7 ............................. channel 7
C8 ............................. channel 8
C9 ............................. channel 9
RT ............................. run time
TT ............................. total time
SQ ............................. sequential teit (lap time)
DTR .......................... parallel slalom net: run difference time
DTT ........................... parallel slalom net: total difference time
kmh ........................... speed measurement (possible: kmh, mps, mph)
+ ................................ countdown was stopped before reaching zero
- ................................. countdown was stopped after reaching zero
HH:MM:SS.zht .......... time in hours, minutes, seconds and 1/1000 seconds
HH:MM:SS.zhtq ........ time in hourse, minutes, seconds and 1/10,000 seconds
sssss.ss .................... speed from 0.00 to 99999.99
GR ............................ group (from 01 to 99, no groups = 00)
## .............................. parallel slalom net: consecutive number at each lap
(CR) .......................... carriage return
The following characters can be at 1
st
position:
x ................................ blank
? ................................ time without valid start number
B ............................... time with Block-key ignored
m ............................... time from memory
c ................................ times cleared (with <CLEAR>)
d ................................ times deleted by disqualification
i ................................. time entered manually with <INPUT>
n ................................ new start number shown on finish display (6)
p ................................ time calculated from penalty time (parallel slalom)
Содержание TDC8001
