ALGE-Timing TDC8001, Руководство пользователя

Страница: 49 / 112

Manual
TdC 8001
-49-
Count Down Time 1 Menu 43 Default = 00:01:00.00
Countdown time for carving and show jumping can be entered (carving: 0 to 23:59:59.99, show jumping:
0 to 6399.99 seconds). This time applies to all participants (main course at show jumping).
Menu 43: COUNT DOWN TIME 1 = 00:01:00.00 enter countdown time
Save with: ENTER exit with <ENTER>
Count Down Time 2 Menu 44 Default = 00:01:00.00
Countdown time for 2
nd
phase at show jumping can be entered. A time from 0 to 6399.99 is adjustable.
This countdown time applies to all participants.
Menu 44: COUNT DOWN TIME 2 = 0030.00
enter countdown time
Save with: ENTER
exit with <ENTER>
Count Down for GAZ Menu 45 Default = ON
Countdown for show jumping can be deactivated for display boards. If it is deactivated for the display
board, all other countdown functions stay activated.
Menu 45: D-BOARD COUNT DOWN ON <
output to display board
OFF no output on GAZ
Save with: ENTER
exit with <ENTER>
Time Out Signal Menu 46 Default = ON
The tone signal output for the timeout you can switch on or off.
Add PTM immediately Menu 47 Default = OFF
This menu is only for show jumping. PTM are penalty points caused through time violence. This menu
has only influence for the data output for display boards. Setting the menu on ON it shows the penalty
points when the time is running immediately. When OFF is activated it shows the PTM only after you
add the result by pressing the key F3.
Teams Menu 48 Default = OFF
This point is only for team show jumping events. If you select ON you can input the bibs of each team.
Distance Menu 49 Default = 0
To input the race distance for the program Cycling. The distance is needed to calculate the average
speed. You can input the distance between 0 and 999999 Meter.
Speed Skating Track Menu 51 Default = 400 m
For speed skating you have to select the track length to calculate the amount of laps. You can select
between 333, 400 and 500 m. Further you can input yourself the track length in meter.
Precision Menu 52
This menu is not active any more. You must input the timing precision after you selected the program.
BIB Counting Menu 53 Default = UP
You can select if the bib changes after a start. When selecting <MANUAL> you have to key in the next
bib. When selecting <UP> after the start the bib changes to the next higher free bib (in the second run
when using the BIBO it will change the bib to the next bib by bibo-rule). When selecting <DOWN> after
the start the bib changes to the next lower free bib.
Menu 53: BIB COUNTING UP <
counting up
MANUAL manual input
DOWN counting down
Save with: ENTER exit with <ENTER>
Attention: Enter start number 0 with start keypad for fast deactivation of automatic counting; automatic
counting is blocked.
Time Out Menu 54 Default = 0 seconds
Used for show jumping and agility. When you input a time limit it disqualifies the competitor when this
time is reached. The time is adjustable between 0 and 999 seconds. When using 0 there is no time limit.