2 735 061, Rev. 030798
Operating Instructions tico 735 - Elapsed Timer
page 1/12
Operating Instructions tico 735 - Elapsed Timer
Introduction
Your Hengstler tico 735 Elapsed Timer is one model in a family of 1/8 DIN units which offers breakthrough
display technology as well as easy-to-program single-line parameters.
Designed to provide instant visual feedback regarding an application’s key input value, the tico 735 not
only has a 18 mm high LED display, but also the ability to change display colour based on process status
(programmable parameter in Operation Mode). Easy programming is made possible via a help function
and a secondary legend display.
This manual will guide you through the installation and wiring of your tico 735 unit with information on
proper panel mounting and rear terminal layout and wiring instructions. In addition, the instrument’s
operation and programming modes are thoroughly explained. The operation mode provides day to day
operation and allows editing of preset values. The Program Mode enables the configuration of various
parameters prior to initial operation. These parameters include those for basic configuration as well as
other settable features which will enhance the functionality
and usability of the device.
This manual also provides information on the tico 735
Elapsed Timers’s transistor and relay outputs, product
specifications and ordering and warranty information.
Features
•
Awesome 18 mm high digit LED display
•
Programmable colour change display based on an
event
•
Programmable help function and secondary legend display
•
Programmable for single input or cumulative operation
•
Choice of NPN or PNP primary input
•
Standard outputs: one NPN transistor & one relay
•
Front panel reset enable and preset lockout
•
Optional RS-485 plug in card
Index
Safety Instructions ...........................................................................................................................2
Installation........................................................................................................................................3
Panel mounting .........................................................................................................................3
Wiring........................................................................................................................................4
Operation .........................................................................................................................................5
Front Panel ...............................................................................................................................5
Operation Mode ........................................................................................................................6
Program Mode .................................................................................................................................7
Entering Program Mode and basic operation............................................................................7
Program Parameter Sequence .................................................................................................8
Technical Data ...............................................................................................................................11
Ordering Information ...............................................................................................................12
