INSTRUCTION MANUAL
TOGOAL Plug-in Timer Outlet
Important
Please read these directions and follow all the steps, including the
TIPS
and
NOTES
, before you use the device. These notes can help you make better use
of the device. If you are not 100% satisfied for any reason, before leaving a
negative review, please contact us at
We will immediately resolve any issue you may have.
Safety Use & Care
If the screen is blank, please plug the timer into an active wall socket, and
then use a pin to press the
RESET
button for about 5 seconds.
Please keep this manual in a safe place for future reference.
Heaters, pet feeders and similar appliances should never be left
unattended during operation. The manufacturer recommends such
appliances not be connected to timers.
DO NOT attempt to repair, disassemble or modify under any circumstances.
Features
Up to 18 groups of ON-OFF timer programs; every program you set repeats
once each week
Countdown function to turn off appliances automatically after pre-set time
Random setting for lights to go on and off at varying times while you’re
away from home
NOTE
: The on-off timer program, the random, and the countdown function
cannot run concurrently. To use the random feature, please exit the
countdown. To use the on-off timer programs, please cancel the countdown
and the random function.
To Set the Digital Clock
For example, to set the time as 9:30am Tuesday in DST.
1. Press the
RESET
button with a pin to reset the timer. The timer will enter
the "Clock Mode".
2. While holding the CLOCK button down, press the TIMER button to choose
12-hour mode. "AM" will appear on the screen.
3. While holding the CLOCK button down, press the ON/AUTO/OFF button to
toggle between Standard Time and Daylight Saving Time (DST). The clock will
increase by one hour and the display will show "S" when changed to the DST.
4. While holding the CLOCK button down, press WEEK to adjust the day to TU.
5. While holding the CLOCK button down, press HOUR repeatedly to set the
time to 9:00AM.
6. While holding the CLOCK button down, press MINUTE repeatedly to set the
time to 9:30AM.
TIPS
: Press and hold the HOUR or MINUTE button during setting, you can
navigate quickly through the numbers.
To Set the ON-OFF Programs
You can set up to 18 programs. To set a program, you will need to enter both
the ON time and OFF time. For example, to set the timer to come on at
8:30AM and go off at 10:30PM every Monday thru Friday, please do the
following:
1. Press TIMER to begin to set the ON time for the 1st program.
2. Press WEEK repeatedly to set the day combination to "MO TU WE TH FR".
The pre-set day combinations will advance in the following sequence: MO TU WE TH FR SA SU -> MO
-> TU -> WE -> TH -> FR -> SA -> SU -> MO TU WE TH FR -> SA SU -> MO TU WE TH FR SA -> MO WE FR
-> TU TH SA -> MO TU WE -> TH FR SA -> MO WE FR SU
3. Press HOUR repeatedly (or press and hold it) to adjust the time to 8:00AM,
and then the MINUTE button to adjust the time to 8:30AM.
4. Press
the
TIMER button again to begin to set the OFF time for the 1st
program.
5. Refer to steps 2~3 to set the off time to 10:30PM every MO TU WE TH FR.
(Note: Do not forget to select the desired day combination for the off time as
MO TU WE TH FR.)
6. Press TIMER again, you will be able to set the 2nd, the 3rd... and totally up to
18 programs by referring the steps above.
7. When all programs needed are finished, press CLOCK to go back to the clock
mode. Plug the timer into an active outlet and it is ready for use.
TIPS
: Please leave the ON-OFF switch of your appliance always on in order to
use it with the timer.
*IMPORTANT
: If you plug the timer into the wall socket between any on-off
interval you set(8:30AM~10:30PM every Monday thru Friday), the timer may
not come on immediately on that day the moment you plug it in. Instead, it will
stay inactive and automatically come on at 8:30AM next morning, and then
repeat the programs you set automatically. Under this circumstance, if you want
to have the timer on the moment it is plugged in, please hit the ON/AUTO/OFF
button to manually turn on the timer first, and then press the button once more
to put the screen back to AUTO.
TIPS
:
1. When setting the programs, you can press the RES/RCL button to erase the
current setting or press the button once more to restore.
2. To review the programs you set, press the TIMER button repeatedly.
During review, you can also modify the settings according to your needs.
3. If you have multiple programs, please make sure that the on-off intervals
of the programs do not overlap with each other, especially when using the day
combination option.
