ALDI WZTS 2000 Скачать руководство пользователя страница 7

Страница: 7 / 41

General information

www.einhell.co.uk

AFTER SALES SUPPORT

IRE

0044 151 649 1500

0044 1890 946 244

GB IRE

General information

Reading and storing the user manual

This user manual accompanies this table saw. It contains important

information on safety, usage and care.
Read this user manual carefully before using the table saw. Pay

particular attention to the safety instructions and warnings. Failure to

follow the instructions in this user manual may result in serious injury or damage to

the table saw.
Comply with applicable local or national regulations concerning the use of this

product. Keep this user manual in a safe place for future reference. If you pass the

table saw on to third parties, please be absolutely sure to include this user manual.

Explanation of symbols

The following symbols and signal words are used in this user manual, on the table

saw or on the packaging.

WARNING!

Designates a hazard that may lead to death or severe

injury if not avoided.

CAUTION!

Designates a hazard that may lead to minor or moder-

ate injury if not avoided.

NOTICE!

Warns against potential damages to property.

This symbol provides you with useful supplementary information on as-

sembly or operation.

Declaration of conformity (see chapter “Declaration of conformity”):

Products marked with this symbol meet all applicable Community regu-

lations for the European Economic Area.

Read the user manual.

Wear protective goggles.

Содержание WZTS 2000










































Результаты поиска

Содержание WZTS 2000

Отзывы:

Бренды по названию

Популярные бренды

ALDI WZTS 2000, Руководство пользователя

Результаты поиска

Содержание WZTS 2000

Отзывы:

Бренды по названию

Популярные бренды