manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 32

Maintenance and care

32

www.einhell.co.uk

AFTER SALES SUPPORT

32

GB IRE

GB

IRE

0044 151 649 1500

0044 1890 946 244

Maintenance and care

 

WARNING!

Risk of injury!

Improperly handling the table saw poses a risk of serious injury.

 

− Before maintenance, switch the table saw off and pull the mains plug out 

of the socket.

 

− Wear suitable protective gloves when working on the table saw.

 

− There are no parts that can be repaired by the user inside this table saw. 

Never attempt to repair the table saw yourself. Always contact a qualified 
workshop for this.

NOTICE!

Risk of damage

Water that has penetrated the housing may cause a short circuit.

 

− Never immerse the table saw in water.

 

− Make sure that no water penetrates the housing.

Proper, regular care is not only important for safe use, but also helps 

to extend the service life of the table saw.

Replacing the carbon brushes

The carbon brushes may only be replaced by a specialist workshop or qualified 

specialist personnel.

Replacing the connector cord

If the mains connection line of the table saw is damaged, it must be replaced by the 

manufacturer, its after sales support or a similarly qualified person in order to prevent 

risks.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды