manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 21

Assembly

21

www.einhell.co.uk

AFTER SALES SUPPORT

GB

IRE

0044 151 649 1500

0044 1890 946 244

GB IRE

6. Use an AF 10 spanner

  24

 to 

loosen the clamp bolt

  40

 

behind the saw blade by 

turning it a few revolutions 

counterclockwise.

7. Insert the splitting wedge behind 

the clamping plate and

  39

 push 

it all the way down.

8. Tighten the clamp bolt by 

turning it a few revolutions 

clockwise.

9. Align the splitting wedge so that 

there is 3–5 mm of space to the 

saw blade on all sides.

10. Fix the splitting wedge in place 

by tightening the clamp bolt by 

turning it clockwise again.

11. Turn the saw blade all the way 

into the saw table by turning the 

crank counterclockwise up to the 

stop point.

29

40

39

29

44

12. Pull the table insert slightly apart and guide it over the laser and splitting wedge 

again. Run the tab on the back of the table insert into the corresponding groove 

on the saw table and then lower the front side.

13.  Check to make sure that the table insert is properly seated: The table insert must 

be flush with the saw table. 

14.  Use the two fixing screws to fix the table insert in place.
15.  Mount the saw blade guard as described in the chapter “Mounting the saw blade 

guard”.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды