manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 16

Safety

16

www.einhell.co.uk

AFTER SALES SUPPORT

16

GB IRE

GB

IRE

0044 151 649 1500

0044 1890 946 244

Supplementary safety instructions for batteries

 

WARNING!

Risk of injury!

Improperly handling batteries may result in severe injury. 

 

− Attention: Danger of explosion due to improper replacement of the 

batteries. Only replace the batteries with the same type or an equivalent 

battery type. Observe the “Technical data”.

 

− Batteries must not be charged, opened, thrown into fire, short circuited or 

reactivated by other means.

 

− Avoid contact with skin, eyes and mucus membranes. In the event of 

contact with battery acid, the affected area must be rinsed immediately 

with plenty of clean water and a doctor must be consulted promptly.

NOTICE!

Risk of damage!

Improper handling may result in damage to the table saw.

 

− Take the batteries out of the battery compartment if they are flat or if 

you do not use the table saw for a prolonged period of time. This avoids 
damage that could be caused by battery leakage.

 

− Do not expose the batteries to extreme conditions by, for example, placing 

them on radiators or exposing them to direct sunlight. 

 

− If necessary, clean the contacts of the batteries and device before 

inserting them, e.g. with a piece of emery cloth.

 

− Do not use old and new batteries or different types of batteries together.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды