manualshive.com logo in svg

ALDI WZTS 2000, Руководство пользователя

Поделиться
Скачать
ALDI WZTS 2000 Скачать руководство пользователя страница 13

Safety

13

www.einhell.co.uk

AFTER SALES SUPPORT

GB

IRE

0044 151 649 1500

0044 1890 946 244

GB IRE

 

− Wear personal protective gear when using the table saw. This may 

include:

•  Ear protection to reduce the risk of becoming hard of hearing;
•  Eye protection;
•  Respiratory protection to reduce the risk of inhaling dust that is 

hazardous to health;

•  Gloves when handling saw blades and rough materials. It is 

recommended to store the saw blades in a container to prevent injury.

 

− Connect the table saw to a suitable dust extractor when cutting wood.

 

− Promptly replace a worn or damaged table insert.

 

− Use a push stick or a push block to safely push the work piece through the 

saw blade. 

 

− Always keep the push stick or the push block by the machine when not in 

use. 

 

− Do not try to cut rebates or grooves with the table saw without fitting a 

suitable protective device, e.g. a tunnel-type device, over the saw table.

 

− Do not use the table saw to cut slots (a groove ending in the work piece).

 

− Only use saw blades whose maximum permissible speed is not less than 

the maximum spindle speed of the table saw and suitable for the material 

you intend to cut.

 

− Only use the transport fixtures for transport; never use the protective 

fixtures for handling or transport.

 

− During transport, always cover the top part of the saw blade, for example, 

with the saw blade guard.

 

WARNING!

Risk of electric shock!

A faulty electrical installation or excessive mains voltage may result in an electric 
shock.

 

− Only connect the table saw if the mains voltage of the socket corresponds 

to the specification on the rating plate.

 

− Only connect the table saw to an easily accessible socket so that you can 

quickly disconnect the table saw from the power supply in the event of a 
fault.

Содержание WZTS 2000










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды